Oregon Scientific BL838, User Manual

Page: 7 / 28

EN
5
CHARGING
1. Connect the main unit with the
USB cable.
2. Connect the USB cable into the
USB power source, the red LED
indicator turns on steadily.
3. When the main unit is fully
charged, the blue LED indicator
turns on steadily.
NOTE
• USB hubs do not always supply enough power for some
devices.
• It is normal that the main unit is heating while charging.
• For protection purpose, the main unit does not work while
charging. Disconnect the main unit from the power adapter
before use.
• The main unit is capable for 5-hour operation after fully
charged (approximately 3 hours).
GETTING STARTED
1. Press the both sides of the cotton puff clip to release.
2. Place the cotton puff onto the metal massage head flatly,
make sure the cotton covers the metal message head
completely and the cotton puff is locked in the clip firmly.
3. Flip the cotton clip to fasten the cotton puff. You hear a click
when the cotton is fastened securely.
4. When the cleansing/ treatment is finished, press the both
sides of the cotton puff clip again to remove the cotton.
OPERATION
BASIC OPERATION
• Press the respective button to turn on the desired mode.
• Press again to switch into intermittent mode. The indicator
flashes.
• Press again to turn off.