Oregon Scientific BL838, User Manual

Page: 8 / 28

EN
6 7
FACIAL CLEANSING AND MASSAGE
1. After face wash, attach the cotton puff onto the massage
head, then apply toner onto your face.
2. Press button to turn on the cleansing mode, the green
LED indicator is on. Grip the silver plating on the both side
of the main unit.
NOTE
For sensitive skin, press twice for the intermittent mode.
3. Massage your face gently with the metal head in direction
as figure shown for 5 minutes.
NOTE
The cleansing mode turns off automatically after
5 minutes.
TIP
For a better result, massage your cheeks, T-zone and
chin for 20 seconds with purified water or toner after basic
cleansing.
ION REVITALIZING
1. Apply your usual moisturizer onto your face evenly. Press
the button, the blue LED indicator is on. Grip the silver
plating on the both side of the main unit.
NOTE
For sensitive skin, press twice for the intermittent mode.
2. Massage your face gently with the metal head in circular
direction as figure shown for 5 minutes.
NOTE
The ion revitalizing mode turns off automatically after
5 minutes.
TIP
Massage your face with toner/lotion/essence/essential oil
for 5 minutes for better adsorption efficiency after treatment.
LIGHT TREATMENT
1. Press to turn on the 590 nm light treatment mode. The
red LED indicator turns on.
NOTE
For sensitive skin, press twice for the intermittent
mode.
2. Hold the main unit in 10 mm away from your face, the
move the main unit back and forth for 10 minutes.
NOTE
• It is recommended to have a light treatment 2-3 times a
week, for a better result, use this before sleep.