Oregon Scientific Alpha C23 Boilers Instruction Manual Download Page 2

Page: 2 / 18

A1 3-Line LCD Display

Displays the time, date and temperature

A2 [ ] Battery-low indicator

Displays when battery power of main unit is low

A3 [ ] Battery-low indicator

Displays when battery power of remote sensor is low

A4 [ ] Radio-reception icon

Indicates the strength of the reception of clock radio signal

A5 [IN/OUT TEMP] BUTTON

- Press to toggle between the Indoor and Outdoor temperature

display

- Press and hold for 2 seconds to activate the auto-search for

remote thermo signal

A6 [MEM] BUTTON

- Press to toggle among current, maximum and minimum

temperature records

- Press and hold for 2 seconds to erase the memories

A7 [ALARM/*] BUTTONS

- Press to display the alarm-1 or alarm-2 function

- Press and hold for 2 seconds to enter the corresponding

alarm time setting mode

A8 [MODE] BUTTON

- Press to toggle among the calendar clock display modes

- Press and hold for 2 seconds to enter the clock setting mode

A9 [ & ] BUTTONS

- Press to increase/ decrease the values in setting modes

- Press and hold for 2 seconds to activate/ deactivate the

autoreception of RF clock radio signal

TOP VIEW

B1 [SNOOZE/ LIGHT] BUTTON

- Press to turn on the EL backlight and projection for 5 seconds

- Press to change the projected temperature (Indoor or Outdoor)

when projection is On

- Press to stop the alarm sound and activate the 8-minutes

Snooze function

B2 [LIGHT AUTO-ON-OFF] SLIDE BUTTON

Slide to select the different mode for the Nightlight

B3 LIGHT SENSOR

B4 ROTATABLE NIGHTLIGHT

Summary of Contents for Alpha C23 Boilers



















Search results

Summary of Contents for Alpha C23 Boilers

Reviews:

Related manuals for Alpha C23 Boilers

Brands by name

Popular brands

Oregon Scientific Alpha C23 Boilers, Instruction Manual

Search results

Summary of Contents for Alpha C23 Boilers

Reviews:

Related manuals for Alpha C23 Boilers

Brands by name

Popular brands