Oreck LW100 Service Manual |
19
11.
Fit the rope gaskets into the left joint. The photo below uses white fan housings to show
the pattern that the grease should be administered. The thick line of grease is applied
primarily against the upper lip of the groove. The wavy line of grease should be smeared
on the flat surface.
12.
Fit the joint halves to the fan housing neck and secure with two screws.
13.
Spread the clamp, bring it over the top of the joint and fit to the bottom of the joint.
14.
Fit the clamp screw through and thread to the antivibration nut. Hand tighten. Swivel the
joint all over to evaluatefunction and ease of movement.
The swivel joint to fan housing
will be stiff when just turning the joint. Be sure to test swivel action with the unit fully
assembled before being concerned with joint swivel stiffness.
Screw
