Ordi Enduro 915, User Manual

Page: 46 / 76

Chapter 5 — Power Management
Power Management
Battery Calibration
The first time you use a battery, you should calibrate it. The calibration
process empties and charges the battery one time. This allows the
Windows battery gauge to accurately monitor battery status. To
calibrate a battery, follow these steps:
1. Plug in the AC adapter.
2. Restart the computer and when the startup screen appears,
press Del key to enter the BIOS Setup Utility.
3. In the BIOS Setup Utility, select Advanced Setup , choose Start
Battery Learning, then press <Enter>.
Please make sure that AC adapter & Battery are present?
Would you like to do battery learning?
[OK]
[Cancel]
4. Select OK. at the above Battery Auto Calibration dialog to begin
the battery calibration. Please press [Y] to continue.
Battery Calibration will take from 10 to 16 hours, depending on how
much power the battery may already contain.
Note: For optimum performance, we recommend
calibrating the battery again every three months.
Each time you charge and discharge a battery, it
loses a tiny part of its storage capacity, so that,
over time, it will store less than its potential
charge. Similarly, if you do not use the battery
for a few days, it will slowly self-discharge, and
when it is recharged, it will hold less than 100%
of the potential charge.
42