background image

Making Connections

 — Right Side Connectors 

4. LAN RJ-45 Jack 

With the built-in Ethernet LAN combo, you can make LAN connections 
without installing PC cards. Connection speed is 10/100/1000 Mbps.

 

When using the LAN function, wrap your LAN cable around the EMI 
ferrite suppression box to inhibit electromagnetic interference. 

5. Fax/modem RJ-11 Jack 

The fax/modem can transmit data using the 56 Kbps V.90 protocol, 
and send and receive faxes at 14.4 Kbps. In some countries, local 
regulations may not permit the use of the fax/modem designed for this 
system. In this case, you may use a PCMCIA modem. 

6. USB (Universal Serial Bus) Ports 

The Universal Serial Bus (USB) is the latest standard for attaching 
monitors, input devices, scanners, and other devices to a PC. USB 
devices can be chained together on a single cable. 

Right Side Connectors 

 

1. USB (Universal Serial Bus) Ports 

The Universal Serial Bus (USB) is the latest standard for attaching 
monitors, input devices, scanners, and other devices to a PC. USB 
devices can be chained together on a single cable. 

2. S-Video Port 

S-Video technology provides sharper video image on a video or 
television device than traditional TV-out connections, provided your 
video display device supports S-Video output. 

3. Com Port 

The Com Port provides the connection for RS232 interface device 
such as mouse and modem. 

37 

Summary of Contents for Enduro 915













































































Reviews: