17
Set-up mode
In the set-up mode, the green LED will burn continuously for 3 minutes. In the
configuration mode, it is possible to connect up to 20 different RF components to
the unit. For the details, please refer to the instruction manual for the relevant
RF component or www.orcon.nl.
In operation
After the learning mode, the unit will automatically switch to 'in operation mode'.
The unit is working properly.
Replace filter
The dirty filter warning on the display is an indication to clean or replace the filters
on time. When the chosen interval time in the printed circuit board has elapsed, it
will send a signal to the display on the unit and to the remote control 15RF. After each
operation the remote control will now flash 3x orange instead of 1x green. The green
LED next to <FILTER> also lights up on the unit display. After cleaning and/or replacing
the filters, the warning can be reset by pressing the button next to <FILTER> on the
display for 3 seconds. With the 15RF remote control you can reset the filter timer by
pressing the <AUTO> and <TIMER> buttons simultaneously.
Summary of Contents for HRC-300-EcoMax
Page 19: ...19...
