Orcon HRC-300-EcoMax, User Manual

Page: 15 / 20

15
6. Malfunctions
I. Remote control 15RF
When a key on the remote control is pressed, the LED lights up green, then it will flash
to confirm. The following indications are possible:
Overview indications remote control RF15
Indication Remote control message
Unit OK, message followed up 1x green
Unit OK, timer activated for 15 minutes 1x green
Unit OK, timer activated for 30 minutes 2x green
Unit OK, timer activated for 60 minutes 3x green
RF Communication problem 3x red
Configuration mode starting up 1x red 1x green 1x red
Successful connection with unit 10x green
Battery almost empty 1x orange 2x green
Reset remote control carried out 2x orange
Filter indication active 3x orange
II. CO
2
Room sensor 15RF
When the status LED on the CO
2
If the room sensor is permanently green, the CO
2
Room sensor is functioning correctly and there is a connection to the ventilation unit.
If the status LED flashes red 3 times, there is no radio-controlled communication with
the ventilation unit. Register the CO
2
Room sensor on the ventilation unit according to
the instructions. If a malfunction occurs in the CO
2
Room sensor, then the status LED
will 1x flash red repeatedly. You need the help of your installer to resolve this problem.
Please contact your installer. Always state the model/type and the error that you are
being shown.