Orcon 22001090, Installer Manual

Page: 23 / 74

index
23
4.6.Placing the appliance
Wall mounting
The unit can be hung on the wall bracket provided. The wall must have a
minimum mass of 200kg/m2 for optimum soundproofing.
Step 1 Fix the wall bracket level to the wall
using the bolts (M8x60 wood
screw) and plugs supplied. There
must be sufficient space under the
unit for the condensation drain (see
chapter 4.7), see dimensions
below.
Step 2 Place the HRC in the left or right configuration over the wall bracket, by
hooking the hook on the back of the unit over the wall bracket. (see
chapter 4.4)
Step 3 Adjust the levelling feet at the back of the appliance so that it hangs
level against the wall.
Note: Make sure the power cord does not get caught under the
suspension bracket when hanging up the unit.
Note: Make sure that the HRC hangs level.
180
900