Orchid SoundWave 32Pro, User Manual

Page: 13 / 67

Section 1: Hardware and Software
SoundWave 32Pro User's Manual 11
Preparing Your SoundWave 32Pro
Jumper Settings
The following table lists the jumpers used in the
configuration of SoundWave 32Pro. The informa-
tion following the table explains the jumpers in
more detail.
Jumper J3: I/O Address
Jumper J3 sets the base port address for Sound
Blaster mode. The default setting is 220 Hex.
Figure 1.3: Jumper J3 (pins 2 and 3
connected).
Default address
1 2 3
If you need to change the default address, connect pins 1 and
2 to select the optional address—240 Hex.
For help on
avoiding
address
conflicts, see
Appendix A.
Jumper Setting Default Function
Jumper J3 Connect 1 & 2 Enable I/O address 240
Connect 2 & 3
✔
Enable I/O address 220
Jumper JP1 Connect 1 & 2 Enable 2MB Wavetable (for
optional 1MB ROMS)
Connect 2 & 3
✔
Enable 1MB Wavetable (512K
ROMS)
Table 1.1: Jumper Settings