Orchid Fahrenheit Video 3D, User Manual

Page: 17 / 52

Fahrenheit Video 3D User's Manual
Section 2: Software Installation
15
Configuring Your Video Display
Refer to the Fahrenheit Video 3D Setup utility in
Section 3 for instructions on configuring your video
display in Windows 3.1x.
Windows NT 3.5x
Driver Installation
1. Boot your system from a DOS system disk.
2. Run the RESETEEP utility program from the
D:\WINNT directory.
3. Boot Windows NT in VGA mode.
4. From the Main group, double-click on Control
Panel, then double-click on Display.
5. Select Change Display Type.
6. From the Change Display Type screen, select
Change for the adapter type.
7. Select the Other button.
8. Insert the Fahrenheit Video 3D CD into your CD-
ROM drive and type: D:\WINNT (where D is the
CD-ROM drive letter). Click on OK.
9. From the Select Driver menu, choose Fahrenheit
Video 3D Driver Version 1.0. Click on the Install
button.
10. Click on Yes to install the driver.
11. Restart your computer for the changes to take
effect.