3
Installing your CD100 Desktop phone
1. Plug one end of the power cable into the DC9v slot on the back of the phone, and the
other end into the adaptor then in to the power outlet. Switch on the mains supply
at the wall socket and charge for 12 hours or overnight.
2. Register your new Desktop phone to the DECT base unit:
Registering a desktop phone
NB: The Registration Button (REG) is located on the rear of the main base of your DECT312.
1.
Press and hold the REG button, located on the rear of the main base of your DECT312, until the SBR
LED is on permanently (takes approx. 10 seconds). Now release the button. You have 5 minutes to
complete the remaining steps on the CD100 Telephone:
2.
Press the OK key to enter the menu mode
3.
Press up/down key to select HS setting
4.
Press the OK key to confirm ‘Register HS’ is displayed
5.
Press OK key to confirm, LCD will now display ‘PIN’
6.
Enter 0000 (factory default PIN code) then press the OK key
7.
After 5-10 seconds your CD100 extension number will appear in the top right corner of the LCD
display.
Registration is now complete.
Press OFF key to exit
Trouble Shooting
If desk-top phone displays
?
then registration was not successful. Repeat steps 1 to 7
