5
Standby mode
When first in standby mode (at the end of a call) the CD100 will display your extension number on the LCD
and antenna icon
After one minute the analogue clock will be displayed.
Answer a call
When the phone rings the LCD will display the incoming phone number (subject to your network
connection/ call provider).
Pick up the handset or press key to answer hands free using the speaker phone.
Make an external call
Pick up the handset or press key
Dial 0 , when you hear the dial tone enter your required number
The number will be displayed on the LCD
To end the call, replace the handset or press the speakerphone
key if in hands-free mode
OR
Pre-dial
Enter the phone number required – No need to enter 0 to get dial tone as above – the number will be
displayed on the LCD
When ready to call pick up the handset
or press
key
Line select function
If you want to make a call out on a specific line press the Line select key then press 1 for the line 1, 2 for
line 2 or 3 for line 3
Redial function
Press Redial key ,verify the number shown on the LCD, then lift the handset
or press
key
Make an internal call
Press INT key followed by the extension number
Then pick up the handset or press key
Answer an internal call
Lift the handset or press key to answer the call
Accepting an external call during an internal call
When on an internal call, you will hear the call waiting tone when an external call comes in.
Press the Off key to end the internal call.
The phone will now ring with the external call
To answer the call, lift the handset or press key
