6 Operation
Operating instructions SCORP
20
(06.07)
MT_SCORP_BA_04_790014762_09.doc
orbitalum tools
gmbh
8. Loosen the locking screw (3).
9. Turn the wheel center clockwise or counterclockwise to the desired
position:
–
if the misalignment of the cut depends too much to the right, adjust the
wheel center clockwise.
–
if the misalignment of the cut depends too much to the left, adjust the
wheel counterclockwise.
The number of steps depend on the actual misalignment. Remember to
lubricate the adjusting wheel at regular intervals.
10. Lock the wheel again.
Adjusting the
control wheel
3
Summary of Contents for SCORP 220 Plus
Page 27: ......