(18.12.17) OC_GFX_BA_790144762_00_EN
orbitalum tools
GmbH, D-78224 Singen, www.orbitalum.com, Tel. +49 (0) 77 31 792-0
5
GFX 3.0, GFX 6.6
| Operating instructions
About these instructions
1. ABOUT THESE INSTRUCTIONS
To allow quick understanding of these instructions and safe handling of the machine, all the warning messages, notes
and symbols used in these instructions are presented here along with their meaning.
1.1
Warning messages
In these instructions, warning messages are used to warn you against the dangers of injury or material damage.
Always read and observe these warning messages!
This is a warning symbol. It should warn you against dangers of injury.
Follow all instructions which are identified with this safety symbol in order to avoid injuries or death.
Warning symbol Meaning
DANGER
Direct danger!
Non-observance could result in death or critical injury.
[
Restrictions (if applicable).
X
Measures to prevent danger.
WARNING
Possible danger!
Non-observance could result in serious injury.
[
Restrictions (if applicable).
X
Measures to prevent danger.
ATTENTION
Dangerous situation!
X
Non-observance could result in minor injuries.
ATTENTION
Dangerous situation!
X
Non-observance could result in material damage.
1.2
Further symbols and displays
Symbol
Meaning
IMPORTANT
NOTE
Notes: Contain particularly important information for comprehension.
Instruction: You must take notice of this symbol.
1.
Request for action in a sequence of actions: You have to do something here.
Single request for action: You have to do something here.
Conditional request for action: You have to do something here if the specified condition is met.
1.3
Abbreviations
Abbr.
Abbreviations
GFX 3.0
Pipe Cutting and Beveling Machine for tubes having up to 3" outer diameters
GFX 6.6
Pipe Cutting and Beveling Machine for tubes having up to 6.6" outer diameters
