High-end aluminum alloy
SUS304
40 to 110mm
Concealed super grace B mechanical cylinder
-
20℃-+60℃
4.1BLE
Android 4.3/IOS7.0 above
4 AA Alkaline batteries
4.8V
35
μ
A
＜
200mA
≈
1.5
"
Capacitive touch button
Semiconductor (ZFM-10) < 0.001% < 1.0%
200 pieces
<
0.001%
< 1.0%
APP send password
custom password
MIFARE M1 card
100 pieces
APP, Password, Fingerprint, Card, Mechanical key
Bluetooth
Panel material
Latch material
Door thickness
Cylinder
Operating temperature
Bluetooth standard
Support phone system
Working voltage
Low battery voltage alarm
Static current
Operating current
Unlock time
Button type
Fingerprint header type
Fingerprint capacity
False accept rate (FAR)
False reject rate (FRR)
Password type
Card type
Card capacity
Unlocking method
3
4
1. This product uses 4 AA alkaline dry batteries, please install the battery
according to the correct positive and negative electrodes.
2.When the voltage is lower than 4.8V, a low voltage alarm will sound every
time the lock is unlocked. Pay attention to replace the battery in time.
3. Do not short the positive and negative terminals of the battery.
4.Please use the specified battery in this product, do not connect other
batteries modified by yourself.
5.Do not discard the replaced battery to avoid polluting the environment.
1
-
3
:
Technical Specifications
1
-
4
:
Safety Precautions
1. Keep the panel away from corrosive substances to avoid damage to the
surface coating.
2. Do not operate the product with wet hands to prevent liquids such as
water or drinks from entering the lock body.
3. Do not press the keypad with excessive force or with sharp objects.
4. Keep your fingers clean
while
using this product. To ensure normal use,
keep the fingerprint area clean as the surface may become smudged after
it is used for a period of time.
5. Do not pull the product
with excessive force
.
6. Do not use water, benzene or alcohol to clean the product; use a soft and
dry cloth to clean the lock body.
1
-
5
:
Charging Safety
1
-
6
:
Precautions for Use
1.
Do not install batteries before the lock is installed on the door.
2.
P
lease carefully keep your password and change it on a regular base to
prevent leak
s
.
3.
C
harge or replace the batteries within one week after the battery
replacement alarm sounds.
4.
M
ake sure that the door is completely locked when leaving.
If you fail to open the door using the fingerprint, password or card, you can
use the mechanical key. Please keep the mechanical key properly.
