Orbit T944, Owner'S Manual, Page: 6 / 20

ASSEMBLY STEP 4:
5
Pull through the computer middle
wire of Handle bar tube(10) from
the left and right Upright(3,4).
Then insert the handle bar tube
into left and right upright;
2
、
Fix the handle bar tube(10) and
left/right upright with screw driver
and M6*16 sheet metal screw(83)
1.Connect the computer upper
wire(116,127,134,135) with
computer middle wire(117a) out of
the Left/Right Upright(3,4).
ASSEMBLY STEP 5:
Warning: Please make sure note
not to damage the wires. The
connect method is shown on
lable(126)
2.Use wrench, M10*20 screw(67)
and washer(88) to fix the
computer (113) to the left/Right
Upright
（
3,4
）
ATTENTION
：
Please complete all assembly instruction before tightening
and checking all bolts. Do the following operation after checking
everything is OK. Before you use the treadmill, pls read the instruction
carefully.