background image

   
 

 

We recommend lubrication of the deck according to the following timetable: 

¾

  Light user (less than 3 using hours/ week)           once a year 

¾

  Medium user (3-5 using hours/ week)                 every six months 

¾

  Heavy user (more than 5 using hours/ week)         every three months 

 
 
 
 
 
 
 
 
 
 

We suggest you purchasing the lubricant from our local distributors or contact with our company 
directly. 

Note: For other maintenance, please have specialized person to operate. 

1

  To have a better maintenance over the treadmill and prolong its life, 

unplug the treadmill from the 

power inlet when not in use.   

2

  Loose belts will result in 

the belt slipping

 while running, 

if the belt is

 too tight it shall decrease the 

motor performance and creating more friction between the roller and running belts. The most suitable 
tightness of the belts would be: the belts can be pulled out 50-75mm away from the running boards. 

3.

   

Check that all the bolts are tightened after the first training session. Bolts etc should be checked and 

tightened regularly as part of the treadmills ongoing maintenance program

 

 

 

 

 

 

 

 

 

 

15 

Summary of Contents for T944





















Reviews: