11
INCLINE 2
3
3
2
2
3
3
3
2
2
2 2 4 4 4 6 6 3 2
2
SPEED 2
4
4
5
6
7
7
5
6
7
8 8 5 4 3 3 6 5 4
2
P5
INCLINE 3
3
3
4
4
5
5
5
4
4
4 4 5 5 3 3 3 2 2
2
SPEED 2
4
4
4
5
6
8
8
6
7
8 8 6 4 4 2 5 4 3
2
P6
INCLINE 3
5
5
5
4
4
4
3
3
3
3 4 4 4 3 3 3 4 3
2
SPEED 2
3
3
3
4
5
3
4
5
3
4 5 3 3 3 6 6 5 3
3
P7
INCLINE 4
4
4
4
3
3
6
6
6
7
7 8 8 9 9 6 6 5 3
3
SPEED 2
3
3
6
7
7
4
6
7
4
6 7 4 4 4 2 3 4 4
2
P8
INCLINE 4 5 5 5
6 6 6 7
8
9
9 9 10
10
10 12 12 8 6
3
SPEED 2
4
4
7
7
4
7
8
4
8
9 9 4 4 4 5 6 3 3
2
P9
INCLINE 5
5
5
6
6
6
4
4
6
6
5 5 8 8 9 9 9 7 4
2
User programs
Besides the 9 preset programs, we
do have
3 user’s programs U1
、
U2
、
U3.
You can use these to make
you and your family an individual program.
To start press the program until it shows the user program(U1,U2,U3) choose one and the “TIME” will
flash showing the pre-set time of 15min . If you wish to change the length of your workout , press (+) or
(-) on the speed or incline button, when you have adjusted the time to your desired workout duration ,
press the “mode” button and your workout time will be selected. After pressing the mode button the first
segment of your program will flash, go straight to the quick speed or quick set incline button and
select your desired speed or incline , press mode and your choice will be set, the next workout segment
will flash, go through the same setup as you completed with segment one. You must complete all 20
segments, at the end the computer will flash “OK”, your user program is now saved and ready to use,
When using your user program the screen will switch from incline to speed(every 5 seconds) and your
set programmed levels will be displayed.
HeartRate Control(HRC) program
1 To begin ,press “PROGRAM” until the “matrix” window displays “HP1-HP2”(Heart
rate control program)
Both the programs have default speed and max heart rate . The default speed for HP1 is 8KPH with
a default heart rate of 150 beats per minute. The HP2 has a default max speed of 9.0 KPH with a
default heart rate of 160 beats per munute. When you reach the default speed and you haven’t
reached your desired heart rate, the treadmill will automatically increase the incline level
After selecting the HP1/HP2 by pushing the program button, the time window will flash 15min adjust
the time setting via (+)(-) speed or incline button when you have adjusted to your desired time
press “mode” the time window will flash 30. This is the pre-set age , press (+) or (-) on the incline or
speed button to select your current age. Press “mode” when you have choosen the correct age, the
pulse window will flash the preset heart rate 150 for HP1 and 160 for HP2.
Press the “START” after finishing all the parameters set-up.
At the status of “HP1-HP2”, If you press the “START” without setting up anything, then the system will
control the speed and incline according to the default pulse
At the status of “HP1-HP2”,you can press “”
、
“INCLINE -”
、
“SPEED+”
、
“SPEED -” to adjust the
Summary of Contents for T944
Page 1: ......
Page 18: ...EXPLODED DRAWING 17 ...