Running belt tension adjustment
The treadmill has been adjusted and passed QC inspection before leaving the
factory. If there is phenomenon of bias running of the belt, the possible reasons
might be:
A. The frame is not stably laid
B. The user is not running on the center of the running belt;
C. The user
’s two feet are not using even strength.
For bias which cannot be fixed automatically, try the following methods to fix the
belt, as picture shown
24
9
If the belt tends to move to the right, you should turn
the belt adjustment screw on the right in clockwise
direction. We recommend you turn 1/4 turn each
time and check how it works. If the belt remains
slanting to the right ,then turn the belt adjustment
screw on the left in counterclockwise direction
1/4,as shown in the picture A
If the belt tends to move to the left, then turn the belt
adjustment screw on the left in clockwise direction
for 1/4 turn. If the belt remains slanting to the
left ,then turn the belt adjustment screw on the
right in counterclockwise direction for 1/4 turn, as
shown in the picture B
After having been used for a period, the belt might be
slightly elongated, and slipping and halting might
appear when a person is running on it. When these
phenomena appear, you should secure the screws
on both sides for 1/4 turn. If the belt is too tight, just
loosen the screw on both sides for 1/4 turn, as
shown in pict
ure
C.
MAINTENANCE
A
B
C
Summary of Contents for StarStrider SS55C
Page 1: ......
Page 26: ...25 EXPLODED DRAWING ...
