Orbit Phoenix CDXP, User Manual

Page: 17 / 28

UP : To select training mode and adjust function value up.
DOWN : To select training mode and adjust function value down.
TOTAL RESET: To power on the computer again, and clean all preset function values at zero.
Function :
TIME : Count up - No preset target, Time will count up from 00:00 to maximum 99:59 with each
increment is 1 second.
Count down - If training with preset Time, Time will cound down from preset to 00:00.Each preset
Increment or decrement is 1 minute between 1:00 to 99:00.
SPEED : Display current training speed from 0.0 to maximum 99.9 km or ml.
RPM : Display current training rotation per minute.
DISTANCE : Count up - No preset target, Distance will count up from 0.00 to maximum 99.90 with each
Increment 0.1 KM
Count down - If training with preset target, Distance will cound down from preset to 0.00.
Each preset increment or decrement is 0.1 KM (or ML) between 0.00 to 99.90.
CALORIES : Count up - No preset target, Calories will count up from 0 to maximum 990 with each 1 cal
increment.
Count down - If training with preset target, Calories will count down from preset time to 0.
Each preset increment or decrement is 10 cal from 0 to 990 cal.
PULSE : To display your current heart beat figures as soon as the pulse sensor has been touched.
The monitor will detect your heart best through handgrip sensors or chest belt.
WATT : Display current training watt figures.
RECOVERY : After exercising for a period of time, keep holding on handgrips and press “RECOVERY”
button. All function display will stop except “TIME” starts counting down from 00:60 to 00:00.
Screen will display your heart rate recovery status with the F1,F2….to F6. F1 is the best,
F6 is the worst. User may keep exercising to improve the heart rate recovery status.
(Press the RECOVERY button again to return the main display.)
Note:
1. When there is no signal been transferred into the computer for 4 minutes, the LCD display will shut off
automatically, and all previous training data will be stored. You may press any button to have the
computer restart working.
2. When computer displays abnormally, please plug-out the adapter and plug-in again.
3. The monitor can be switched to Metric or English of SPEED/DISTANCE calculating by switching the
KM/ML switch.
4.
This computer require 9V, 500 mA adaptor.
Orbit fitness
©2013
16