Orbit Phoenix CDXP, User Manual

Page: 16 / 28

drawing 13 drawing 14
5. Training in USER PROGRAM
：
After USER PROGRAM selected, you may set prefer program profile by pressing UP, DOWN and
MODE button for each flashing column. There are 20 segments for setting, if you want to quit during
setting, you may hold on MODE button for 2 seconds to quit, the previous setting profile will be
saved for unfinished segment. (drawing 15)
drawing 15
6. Training in H.R.C. mode
：
AGE 25 is flashing after enter H.R.C. mode, you may set your age by pressing UP/DOWN/MODE
button. The monitor will calculate preset heart rate value automatically according to your age setting.
Screen will show heart rate percentage 55%, 75%, 90% and TARGET. You may select heart rate
percentage by UP/DOWN/MODE button for training. (drawing 16)
drawing 16
7. Training in WATT mode :
The preset watt value 120 is flashing on screen in WATT setting mode, select UP/DOWN/MODE to
set target value from 10 to 350. Pressing START button to start training.
Button Functions :
MODE : To set function value for TIME, DIST, CAL, PULSE stand by mode.
RESET : Return to main function mode stand by mode.
START/STOP : To start or stop training
RECOVERY : To test hear rate recovery status.
Orbit fitness
©2013
15