Step 3:
A:
Fix the Handlebar (7) on the Handlebar Post (16)
with Hex Socket Cylindrical Bolt (5) and Spring
Washer (6) as shown.
B:
Insert the Pulse Sensor Wire (8) into the clamp
hole of Handlebar Post (16) and pull out from the
computer bracket hole, and then cover the
Handlebar Chuck Cover (4).
Step 4:
A:
Fix the Saddle (38) onto the Saddle Post (35)
with Flat Washer (37) and Nylon Nut (36)
B:
Insert the Saddle Post (35) into the post of
Main Frame (1), and fix it with Knob (32) after
adjusting to a suitable height.
