ASSEMBLY INSTRUCTION
Step 1:
Fix the Front Stabilizer (23) and Rear Stabilizer
(31) onto the Main Frame (1) with Acorn Nut
(24), Arc Washer (25), and Carriage Bolt (26) as
shown.
Step 2:
A:
Insert the Tension Cable (19) onto the
Handlebar Post (16) and pull it out from the
Tension Controller’s hole. Then connect Sensor
Wire (20) tightly with Extension Wire (12) as
shown.
B:
Fix the Handlebar Post (16) on the post of the
Main Frame (1) with Hex Socket Cylindrical Bolt
(17) and Arc Washer (18) as shown.
C:
Connect Tension Cable (19) with the wire of
Tension Controller (15), and then fix the
Tension Controller (15) onto the Handlebar Post
(16) with Cross Pan Head Screw (13), Arc
Washer (14) and Tension Cover (29) as shown.
Note:
The Tension Controller (15) can change
the resistance.
Total adjustable tension is 8 sections.