Tools
ASSEMBLY INSTRUCTION
NOTE:
Most of the listed assembly hardware has been packaged separately, but some hardware items
have been preinstalled in the identified assembly parts. In these instances, simply remove and
reinstall the hardware as assembly is required.
Please reference the individual assembly steps and make note of all preinstalled hardware.
PREPARATION: Before assembling, make sure that you will have enough space around the item;
Use the present tooling for assembling; before assembling please check whether all needed parts
are available.
It is strongly recommended this machine to be assembled by two or more people to avoid possible
injury.
Step 1:
Install the Front stabilizer (2) and Rear stabilizer (3) to the Main frame (1) and fixing with the
Square neck bolt (13), Arc washers (14) and Acorn nut (15).
