Orbit Reader 20
– User guide
Version 2.10
Orbit Research
Confidential and Proprietary Information
57
2. Connect the Orbit Reader 20 to the PC using the USB cable.
3. In the Release folder on your PC, run the Orbit Reader 20 Firmware
Upgrade Utility. If you receive an error message, see
section. Assuming no errors, the program displays the message,
“Note:
Connect the device to the PC and put into upgrade mode. To enter,
Firmware Upgrade Mode, press and hold the Right Panning forward
'Dot 5' key. Then press and release the 'Dot 8' key. The other
keys can be released after this
” in the message field.
4. Press and hold down the Right Panning forward Dot 5, then press
Dot 8.
The utility shows the message “Orbit Reader 20 is connected” in
the device status field.
It shows the message “Do you want to upgrade the
device?” in the message field at the bottom of the dialog.
5. Release Dot 8 first, then release the Right Panning key and Dot 5. This
switches the Orbit reader 20 to Upgrade mode. You should hear a tone on
your PC.
6. The utility shows the device serial number and the software version of the
device at the top right corner of the window. If the serial number is blank,
repeat steps 4 and 5.
7. Activate the Browse button found in the dialog.
8. Browse and select the firmware bin file from your PC. The file is in the
folder you unzipped previously.
9. Once the file is selected, the dialog shows the software version of the
selected file.