Orbit Merret OM PROFI, User Manual

Page: 4 / 16

4 | USER MANUAL OM PROFI
2.
DESCRIPTION
OF COMMUNICATION
The connection of ORBIT MERRET devices to the ProfiNet data line is implemented by an internal card with
the TPS-1 control circuit.
The order of connected lines does not matter
2.1
LED SIGNALISATION
STATUS - Profibus
„D 1“
LED green
OM communicat.
„D 2“
LED gelb
ProfiBus line
„D 3“
LED red
Error
Start – initial delay and initialisation flashing flashing flashing
Start – identification of OM instruments light on light on light on
Communication with OM instruments light on (flashing) light off light off
Communication via Profibus line light off light on (flashing) light off
The set function is unknown light off light on light off
Error in communication with OM instruments light on light off light on
Error in communication via Profibus line light off light on light on
Error of OM instrument
(communication speed is out of range)
light off light off light on
STATUS - Profinet
„D 1“
LED gelb
„D 2“
LED green
„D 3“
LED red
„D 4“
LED red
„D 5“
LED green
Setup Requirement flashing
Profinet driver error light off
No communication with the processor flashing
Everything is ok light on
System error light on
OM device is not on line light on
OM on the line but the controller is not activated flashing
OM device connected and communicating light off
Error light on
Bootloader flashing - fast
Everything is ok flashing - slow
Port 1
Port 2
D1
Signalling LEDs
D1 D2 D3 D4 D5