Orbis CODITEL 2, User Manual

Page: 42 / 156

En
gli
sh
- 40 -
User Manual CODITEL 2
RINGRISP
[status] with status that can assume the values:
− ON  sends a text message to the caller on the response of the outputs to the ring
− OFF  no text message will be sent as reply
If the value is omitted, the current instrument status will be the reply.
• Defining the response to a ring (for admin only)
The response of the outputs to a ring from an enabled telephone number can be defined
through the command:
OUTRING
[output number][output status][status holding time][unit of measurement],
− [output number]  indicates the output to which reference is made (1 or 2)
− [output status]  can assume the values ON, OFF, TOGGLE, DISABLE
− [status holding time]  maximum time setting (2
32
-1) secondi (parametro
opzionale)
− [unit of measurement]  s seconds, m minutes, h hours (optional parameter)
Some examples:
OUTRING 1 ON
the relay 1 is turned ON
OUTRING 1 OFF 10 S the relay 1 is turned OFF for 10 seconds when the ring is
received
OUTRING 2 DISABLE the relay 2 does not do anything when the ring is received
OUTRING 2 TOGGLE the relay 2 changes position when the ring is received
• Setting the output status
To send more complex commands to the instrument, text messages must be used.
The possible commands are:
OUT
[output number][output status][status holding time][unit of measurement],
− [output number]  indicates the output to which reference is made (1 or 2)
− [output status]  can assume the values ON, OFF
− [status holding time]

maximum time setting (2
32
-1) seconds (optional
parameter)
− [unit of measurement]  s seconds, m minutes, h hours (optional parameter)
Some examples:
OUT 1 OFF 10 S
sets the relay 1 OFF for 10 seconds
OUT 2 ON 12 H sets the relay 2 ON for 12 hours