OGi Modem - Hardware Guide
T401, Version .15 32 © ORBCOMM Proprietary
Do not use metallic paint or tinting that may be conductive.
4.5.1 Label Guidelines
The label on the modem includes its mobile ID. If the modem is placed inside of an
enclosure that is not intended to be opened, an exterior label must be affixed to the
enclosure, in a visible location.
When integrating the modem into an enclosure, you must do one of the following:
Provide visibility of the modem through a window.
Provide an easy way to get to the modem when an access panel or door is
removed.
Place a label on the outside of the final enclosure that contains the following
information:
A copy of the ORBCOMM logo
Text that indicates the enclosure contains a transmitter
The mobile ID
A list of all valid certifications (for example, ETSI, Industry Canada, etc.)
With this information on the enclosure, installers can readily identify the required
information.
4.5.2 Mating Connector Guidelines
Refer to section 3.1 for connector guidelines.
4.6 Modem Mounting Guidelines
As shown in Figure 22 the modem has a hole in each corner of the enclosure sized for
M2.5 hardware to secure the modem to an application card or other environmental
enclosure surface.
Figure 22 Modem Mounting Holes
Screw holes (2)
Mate with
a Mini PCI
Express
Connector
