Orava VL-204, Instruction Manual

Page: 16 / 20

16
EN
Operation
1.
Turn the thermostat regulator to the minimum setting, and set the
switch/mode switch to position 0.
2.
Connect the appliance to the mains and set the thermostat regulator to
its maximum position. Then set the on/off switch to cold or warm air and
power.
When the device is operating, this is indicated by the power indicator.
3.
Set the power switch/mode switch to position , fan blowing cold air.
4. Set the Power/Mode Switch to Position I, the fan blows 1000W of warm
air.
5. Set the Power/Mode Switch to Position II, the fan blows 2,000 watts of
warm air.
6.
Set the power switch/mode switch to position 0, the fan will stop blowing
air and the
indicator will stop signaling. The fan is off.
Adjusting the thermostat regulator to maintain the
desired temperature
1.
Set the thermostat regulator to its maximum position.
2. If the room temperature seems to be comfortable - as you wish, turn
the thermostat regulator slowly counterclockwise until the fan stops
blowing.
3.
The thermostat will then automatically maintain the desired room
temperature. The device will turn on/off as needed.
4.
Turn the thermostat counterclockwise to adjust the temperature to a
lower temperature, clockwise to a higher temperature.