Orava VL-204, Instruction Manual

Page: 9 / 20

9
EN
Unpack/Packaging
• Unpack and dispose of all parts and accessories of packaging
materials, labels before operating the machine. Store all packaging
materials in a safe place or keep them out of reach of children and
vulnerable persons.
There is a risk of serious injury!
There is a danger of suffocation!
Inspection/Commissioning
Caution!
• Use only electrothermal heating equipment that is in good technical
condition and under the conditions specified by the applicable
legislative requirements, fire safety regulations and this manual.
• We recommend that you perform both initial and follow-up periodic
inspections of the equipment. Before installation and commissioning,
check that the equipment is complete and shows no visible signs of
damage.
• Do not use the device if it is incomplete, damaged, or any part of it
has been damaged during transport or use. In this case, have the unit
serviced by a workshop.
• Do not attempt to interfere in any way with the structure or setup of the
machine components.
• Clean the equipment according to the instructions in the section before
putting it into operation “Commissioning” or “Start-up” “Before Use”.
• Never clean the device (body with electrical parts and control panel)
and power cord with plug in a manner that could cause liquid to flow
into the device. Only clean these parts with a damp cloth and wipe dry
or allow to dry.
• Clean the machine only when it is turned off and unplugged.
There is a risk of serious injury!
There is a risk of electric shock! There is a risk of fire!
Location/Installation
• The device is designed for use as a portable or wall mount (depending
on model). Attach the appliance to the building components of the
living area - only in accordance with the technical characteristics of the
building components, safety fire protection measures and installation
instructions.
• Use the machine only in its working position (upright and with the rack
or legs correctly installed) and on a flat surface where there is no risk of
tipping over.
Warning! Read carefully.
• An electric heat appliance or electric heater designed for heating
can be installed on the floor of a firefighting class A1fl or A2fl. These
technical building materials are classified as non-combustible according
to a single European classification system (where index fl means “floor
- floor”). From the selected materials we mention e.g. stone paving,
ceramic tiles, concrete etc.