15
EN
Assembly of accessories and use with the engine unit -
Cutting into small pieces
Follow the steps below to attach the food processing and chopping machine.
1.
Place the container (
F
) on a dry, level and firm surface.
Do not plug the power cord into an electrical outlet before fully assembling
the device!
2.
Place the cutting blades (
E
) into the container (
F
). Beware of an accident,
the knives are sharp!
3.
If you want to cut with chopping knives, put only 1 cup of food in the
container at a time. Remove the larger pieces of food before processing
into approximately 2.5 cm of cube.
Do not work more than 1 cup of food at a time!
4.
Attach the cover (
D
) to the top of the container (
F
) with a silicone sealant.
5.
Attach the engine unit (
C
) to the assembled receptacle (
F
) so that the tabs
on the lower part engage in the slots of the lid of the container
6.
Connect the power cord to an electrical outlet.
7.
Press and release the LOW / HIGH (
A, B
) controls as necessary until you
reach the desired chopping of the food.
8.
After completing the work, disconnect the power cord from the electrical
outlet and fold the engine unit (
C
). When opening, firmly grip the container
(
F
) with one hand and remove the container cover (
D
) with the other hand.
9.
When removing the food from the container (
F
), always first select the
knives (
E
). Handle the knives carefully. They are sharp!
Remove the food residues from the container and knives with a rubber
blade
Mixing / whipping
1.
Place the container (
F
) on a dry, level and firm surface.
Do not plug the power cord into an electrical outlet before fully assembling
the device!
2.
Place the cutting blades (
E
) into the container (
F
). Beware of an accident,
the knives are sharp!
3.
To mix with cutting knives, mix the food in the container. 0.8 l food volume
(about 2/3 container volume).
4.
Attach the cover (
D
) to the top of the container (
F
) with a silicone sealant.
5.
Attach the engine unit (
C
) to the assembled knife (
F
) with the cutting blades
(
E
) and the cover (
D
) so that the protrusions on the bottom of the engine
unit fit into the slots of the lid of the container.
6.
Connect the power cord to an electrical outlet.
7.
Press and release the LOW / HIGH (
A, B
) controls as needed until you
reach the desired consistency of the mixed food.
8.
After completing the work, disconnect the power cord from the electrical
outlet and select the drive unit (
C
). When opening, grasp the container (
F
)
firmly with one hand and with the other hand fold the lid of the container.
9.
When removing the food from the container (
F
), always first select the
knives (
E
). Handle the knives carefully. They are sharp!
Remove the food from the container and knife with a rubber blade.
