10
EN
• Always unplug it from the power supply if you leave it
unattended.
• Before each connection of the appliance to the mains
power supply, make sure that the controller (main switch
on/ off switch) is set to „0“ (Off).
• Do not switch the device on or off by plugging in or pulling
out the power cord from the AC outlet.
• Always connect the appliance to mains power supply for
normal use, then turn on the main power switch.
• When you have finished using the appliance, turn off the
main switch and then pull the mains cord out of the mains
socket.
• Do not use the device if the main power switch does not
work.
• The device is under dangerous voltage when the power
supply is connected.
There is a risk of serious injury!
• The machine contains sharp-edged rotating parts - cutting
blades.
Warning!
• Cutting blades are very sharp. Do not touch the blades of
the cutting blades. When handling and cleaning, grasp the
cutting blades behind the plastic shaft. Be very careful.
Warning!
• Do not bend your fingers and do not place other objects in
the work area - inside the container and the rotating parts
when it is in operation.
• If the workspace needs to be handled (cleaning the rotating
parts of the trapped food) - but only when the appliance
is switched off, disconnected from the power supply and
the rotating parts are completely stopped, use only the
specified accessories of the appliance or a suitable item,
plastic knife, plastic spoon . Do not use metal objects.
Warning!
• After switching off the drive, the drive of the rotating parts
will recharge for a certain amount of time. Always wait
until the rotating parts stop completely before handling the
equipment or the container‘s workspace.
There is a risk of serious injury!
There is a risk of tearing/puncture!
