5
EN
2. Special Safety Instructions. Read carefully!
Electrical equipment is designed and manufactured in such a way as to allow for safe
operation and use by persons without a professional qualification. Despite all the me-
asures taken by the manufacturer to ensure safe use, handling and use, it carries with
it certain residual risks and associated potential hazards. To warn of possible hazards,
the following symbols and their meanings have been used on the device and in the
accompanying documentation:
This symbol alerts users that the device is operating a dangerous electrical
voltage. Do not remove protective covers on the device. Failure to observe
the safety instructions during use and operation of the device may result in:
Danger of electric shock!
Danger of serious injury or life threatening!
This symbol alerts users to the following: Risk of serious injury or
life threatening when not following the safety instructions when using
and operating the unit!
Danger of damage to equipment or other damage to property!
This symbol means that the product is made with a double insulation be-
tween hazardous live parts (parts with dangerous voltage from the mains)
and parts that are accessible in normal use.
Transport / Carriage
• When transporting and using, for example, of the transport cart, be careful when mo-
ving, to avoid overturning the device.
• Transport / carry the equipment only after thorough inspection of the space and the
routes, which must be unobstructed.
• Never carry the machine while it is in operation. Do not carry the device while it is plug-
ged into a wall outlet.
• Transfer the device firmly by both hands to the bottom edge of the base or fixed parts of
the body.
• Make sure that your hands and equipment are not damp or slippery when carrying.
There is a risk of serious injury or life threatening!
There is a risk of damage to the device!
Unpacking / Package
• Unpack the equipment (and accessories if equipped) before putting it into service and
remove all parts of the packaging material, labels and labels. Store the packaging in
a safe place, especially out of the reach of children and unaccompanied persons, or
dispose of them safely.
• Clean the machine before commissioning as described in the „Commissioning“ section
or „Cleaning and maintenance“.
• Never clean the device (and the remote control, if equipped) and the power cord with
the plug in a way that could cause the cleaning liquid to drip into the device.
• Clean these parts with a slightly moistened cloth and wipe dry or let it dry.
• Only clean the appliance when the appliance is switched off and disconnected from the
mains.
There is a risk of electric shock!
There is a risk of electrical short circuit!
!
