background image

6

EN

Check / Commissioning

•  We recommend performing both initial and subsequent regular machine inspections.

•  Never use the appliance if it is incomplete, damaged, or any part of it has been dama-

ged during use.

•  Do not use non-original and incomplete parts of the device and its accessories. There is 

a risk of serious injury!

 

There is a risk of damage to the equipment or other property damage!

•  If the equipment has been transported and stored at low temperatures (eg in the winter) 

or excessive humidity, first leave it for about 1 - 2 hours

 

„Acclimatize“ at room temperature to remove any moisture in the electrical / electronic 

parts that arises when the ambient temperature changes.

•  Do not switch the device on or off by plugging in or pulling out the power cord from the 

AC socket.

•  Always connect the appliance to the mains power supply when using it normally, then 

switch on the main switch.

•  When you have finished using the appliance, turn off the main switch and then pull the 

cord out of the mains socket.

•  Do not use the device if the main power switch does not work.

•  The device is under dangerous voltage when the power supply is connected.

 

There is a risk of electric shock!

Location / Installation

•  Only place the device on:

 

- Straight, firm and stable pads - for tables and furniture parts, suitable for the location 

of audio / video equipment.

•  Always make sure that the place where you want to place the device has enough spa-

ce, mechanical strength and load capacity.

•  Do not install the equipment in the rooms (eg enclosed library cabinets, built-in cabinets 

and cabinets, etc.) for which there is insufficient room for space and ventilation.

•  Leave enough free space around the device to ensure the required air circulation. It is 

recommended to keep min. 10 cm from all sides.

•  Do not cover the appliance in part. Do not place any objects and / or decorative and 

other fabrics on the appliance, do not put and do not allow foreign bodies to enter the 

ventilation holes and holes in the housing covers.

•  Do not cover the openings of the airflow covers. Air ventilation ensures reliable and safe 

operation of the device.

 

There is a risk of electric shock! 

 

There is a danger of fire!

Warning!

•  Do not expose the audio device (and the remote control if equipped) to:

-   direct sunlight, heat generating equipment,

-   vibration and mechanical stress,

-   excessive dust,

-   water and excess moisture,

-   insect,

-   an aggressive external environment.

•   Do not set the audio device (and the remote control if equipped)

-   to places where medical devices are used. Their function may be impaired.

-   for unstable carts, stands or tables,

-   to an uneven, unstable and dirty surface,

-   on the close edge of tables, tables or parts of furniture,

-   near containers with water or other liquids.

•   Do not place containers of water or other liquids on shelves that are located above the 

machine.

•   Do not place any objects, especially naked flame objects, equipment, or shelves that 

are located above the device.

Summary of Contents for RR-19A















Reviews: