20
EN
After operation
1
When finished, turn off the unit with the power switch
1
(
1
) on the
remote control.
The green power LED turns red and the infrared light turns off.
2
Switch off the appliance with the main switch on the side of the
appliance from position
I
to position
0
.
The power LED turns off.
3
Unplug the appliance.
Overheat protection
The device is equipped with a thermal switch (fuse), which protects the
device from overheating and switches off the device automatically in
case of risk of overheating. If the device is switched off by the thermal
switch, proceed as follows:
1
Switch off the appliance and disconnect it from the mains.
2
If the overheating was caused by an overlap of the device or an
obstacle near it, correct the cause of the problem.
3
Leave the appliance switched off for a few minutes until it has cooled
down completely.
4
After it has cooled down, you can plug it in, switch it on and use it again.