Orava IO-20 Instruction Manual Download Page 13

13

EN

•   Parts of the appliance that become hot during operation 

remain hot for some time even after the appliance has been 

switched off and disconnected from the mains.

  There is a risk of burns from a hot surface! 

  Danger of very serious injuries!

•   Always keep the device under supervision during use and 

operation!

•   This appliance is not intended to be operated by means 

of an external programmer, automatic timer and remote 

control, as there is a risk of fire if the appliance is covered or 

incorrectly positioned.

•   Do not leave the device unattended during operation, 

especially if there are children, incompetent persons or 

animals near it.

•   Use only the device’s own controls and, if applicable, the 

supplied remote control to operate the device.

•   Do not place any objects on the device, do not allow foreign 

bodies to enter the openings. Do not use the device near 

freely moving textiles - curtains, draperies, etc. Make sure 

that no dirt from the environment, such as clumps of dust, 

fibers, etc.

•   Take extra care during the use and operation of the device to 

avoid contact with rotating parts of your fingers, hair, loose 

decorative chains, or loose clothing.

•   Do not place any containers of water or other liquids on 

the device to prevent spillage and ingress of liquid into the 

interior of the device.

•   To avoid a dangerous situation, do not touch the device with 

wet or damp hands.

•   Do not use the appliance near bathtubs, showers, 

washbasins or other vessels containing water, including 

swimming pools. Do not remove the device if it falls into 

the water. First pull the mains plug out of the mains socket 

and only then remove the appliance from the water. In such 

cases take the device to a specialist garage for verification 

that it is safe and working properly.

  There is a risk of electric shock!

  There is a risk of damage to the device or other property 

damage!

Summary of Contents for IO-20
























Reviews: