19
EN
Parts description
Remote control
1
Switch
1
2
Power switch 750 W
3
Power switch 1500 W
4
Power switch 2000 W
Operation, preparation
Before the fi rst operation, connect the device to the mains and switch
it on with the main switch on the side of the device from position
0
to position
I
. The power LED lights up red. From now it is possible to
control the device using the remote control.
Operation
1
Switch on the appliance with switch
1
(1) on the remote control. The
red power LED turns green.
2
Use the power switches (2, 3, 4) to set the required power to 750 W,
1 500 W or 2 000 W.
Note
• Observe the safety instructions in the introduction to this manual during
operation
1
2
3
4