manualshive.com logo in svg

Orava DVB-30, Manual, Page: 18 / 50

Share
Download
Orava DVB-30 Manual Download Page 18

18

EN

Anténa

TVP

Connecting the device

Connection to TV

SCART OUT connector

Connect the SCART cable (not supplied). The connection provides higher picture 
quality.

HDMI connector

Connect the HDMI cable (not supplied). The connection provides the highest image 
quality
and the ability to reproduce high definition images on a TV capable of displaying 
the image in progressive format. The audio signal is also transmitted via the HDMI 
connection.

RF OUT connector

Connect the aerial cable (not supplied) from this unit to the RF IN jack, for example. on 
TVP. Connections are used to transmit both video and audio signals from this unit.

Antenna connection

RF IN connector

Connect the aerial cable (not supplied) 
from the cable box or the indoor 
or outdoor DVB-T antenna. 
The connection is for receiving a 
digital signal.

Connect to a data network

LAN input connector

Connect the machine to a router 
or data network using a 
LAN cable with a LAN connector.

Summary of Contents for DVB-30



















































Reviews:

No comments