Orava Crater-L Instruction Manual Download Page 7

7

EN

•   The device is intended for household use.

•   Do not use the device in an industrial environment or outdoors.

•   Before connecting the appliance to the mains, make sure that the rated voltage 

indicated on the type plate of the appliance corresponds to the voltage in your socket.

•   Only connect the device to a properly grounded outlet.

•   Do not leave the appliance unattended when it is connected to the mains.

Operation/Use 

Warning!

•   In places where the use of mobile phones is not permitted, or where the device may 

cause interference or danger, such as on an airplane, in hospitals, or near highly 

sensitive electronic medical devices, fuels, chemicals, or shots. with the help of 

explosives, switch off mobile devices.

•  Follow all safety instructions and warnings in these areas.

•   Wireless audio devices that operate in the 2.4 GHz band may interfere with other 

wireless devices or networks.

•   If this unit is placed too close to other Bluetooth® devices or devices using the 2.4 GHz 

or 5 GHz frequency band, it may not work properly and noise and / or audio dropouts 

may occur due to radio wave interference.

Warning!

• The speaker system for a mobile phone is a device that, in use, is associated with a 

change (reduction) in the perception of the surrounding sound stimuli. If you perform 

any activities that are accompanied by an increased level of risk or endangerment of 

yourself or others in your area, always monitor your surroundings carefully to avoid 

causing injury to yourself or others.

•   Be very careful when using the device. In particular, be careful when:

 

driving a car, driving and riding a motorcycle, riding a bicycle, or driving and riding 

another means of transport, where ATTENTION is required in the conditions of 

movement on public roads or public spaces where there are many people in the pursuit 

of leisure activities.

Warning!

•   The device is intended only for operation with a built-in battery, which must not be 

replaced by the user (the device is non-removable) and whose type and technical 

parameters are specified in the technical information of the operating instructions.

•   Make sure that all cable connections are securely and correctly connected. Do not 

insert any conductive objects into the connectors on the device.

•   When connecting and disconnecting connector connections, pull the connections by the 

connectors, never pull the connection by the cable itself.

•   Do not tie signal cables in common bundles. Do not wind the cables together. Do not 

subject signal cables to mechanical stress or damage.

•   Do not let the signal cables hang freely and allow them to be freely accessible and 

accessible to children.

 

Danger of serious injuries!

 

There is a risk of electric shock!

•   The device contains parts of covers (eg ventilation grilles), which can become hot 

during normal operation. Do not cover the ventilation grilles.

•   Never leave the device freely accessible and do not store it with a freely accessible 

cable. Children could pull the device by the cord.

 

Danger of serious injuries!

•   Do not store the device with the cord wrapped around its body. Cable loose

 

“Fold” in the way it was folded in the original packaging from the manufacturer.

•   Never overload the device above the limits set by the technical parameters!

•  If you notice any abnormalities (sounds, odors, smoke ...) while using the device, turn 

off the device immediately and disconnect it from the mains. Have the device checked 

by a specialist garage.

•   Never underestimate the possible dangers and take extra care !!!

Summary of Contents for Crater-L


























Reviews: