14
EN
5
When playing sound from the microphone by pressing the
M-PRI
button, the currently
playing sound is muted when singing into the microphone. Pressing the button again will
turn off the mute function and the sound from the microphone will sound at the same
time as the music.
Bluetooth playback from a Bluetooth device
1
Turn on the Bluetooth interface on your Bluetooth device (phone, tablet, etc.). For
details, refer to the operating instructions of the device.
2
Turn on this unit, then press MODE to select Blue (Bluetooth) audio source. The device
will be in Bluetooth mode, the Blue indicator will flash slowly on the display and the
device will be ready for pairing.
3
On your Bluetooth device (phone, tablet, etc.), search for available Bluetooth devices.
For details, refer to the operating instructions of the device.
When Crater L appears on the display of your Bluetooth device, select it and wait until
a confirmation message with the Crater L appears on the display of your Bluetooth
device and a the message “Bluetooth Connected” sounds from that device and the Blue
indicator stops flashing and stays lit.
If a password is required, enter 0000.
4
After pairing, you can start playback on your Bluetooth device and set the volume on it.
For details on controlling playback on your device, refer to the operating instructions of
the device.
The sound from the paired device will be reproduced by this speaker system.
Playback operations
(The paired device must be compatible with the AVRCP bluetooth profile, if not,
playback cannot be controlled from this speaker system, only from the connected
device)
Playing
Press
7
to start playback.
Suspension
During playback, press
7
. Playback pauses. While paused, press
7
again.
Playback resumes.
Feed back:
l
Scroll to the beginning of the current (single press) or previous tracks (press repeatedly)
and play them automatically.
Feed forward:
L
Skip to the next track (s) (single press or repeat) and play it automatically.
5 Turn
VOLUME
on the unit or press
VOL +/-
on the remote control during playback to
adjust the volume. The set volume is shown on the display.
You can select the desired treble/bass/echo level item with the
MENU
button, then turn
the
VOLUME
control to adjust the level of the desired item. You can also make these
settings directly using the remote control and the corresponding buttons.
You can use the
EQ
button to select the desired
POP/ROCK/JAZZ/CLASICAL/FLAT
equalizer preset.
