35
Buffer Management
This function is very useful when checking to see what happened immediately before and/or after a trigger. Images are
stored internally in the camera from the time immediately preceding the trigger.
For example, by setting the buffer time to 20 seconds, when motion is detected, the footage recorded will start 20
seconds prior to the movement being detected, and will stop 20 seconds later.
Note:
This function just can be used when SD card does not plug in the SD slot of cameras.
Image buffer -
Enable or disable this function. Click
Browse
to preview images.
Buffer time -
Type buffer time.
Buffer FPS -
Type buffer FPS.
Snapshot from -
Select stream that snapshot from.
Image file name -
Type image file name.
Suffix of file name -
Select suffix of file name.
FTP automatic sending -
Enable or disable this function.
FTP server ID -
Select one FTP server, click
Setting
to set FTP server.
Remote path -
Path where to save the image file on the FTP server.
Estimate sending time -
Type estimate time that all buffer images send completed.
Effective period -
Select Effective period. If select schedule, click
Setting
to set schedule.
Click
Apply
to confirm your setting.
Summary of Contents for IP226
Page 3: ...3 Outdoor camera...
Page 54: ...54 IPCAM 2012 11...
