Orantek IP226, User Manual

Page: 15 / 54

15
Snapshot quality - The quality of the snapshot saved using Live View page (Internet Explorer only). It also affects the
quality of the snapshot to be uploaded to an FTP Server. It can be from 20 to 100 where 100 is the best quality.
Audio - Enable or disable audio of the associated stream.
RTSP authentication - Enable or disable MPEG4 RTSP authentication. RealPlayer can be used to view the live stream
from the camera, but RealPlayer does not support authentication, so the authentication of MPEG4 RTSP should be
disabled. This however may expose the camera to unauthorized access. QuickTime Player, on the other hand,
supports authentication and can be used to view the live stream.
Note
: You can use Mobile phone to play the mobile stream from camera
,
but generally Mobile phone do not support
authentication, so you have to disable the RTSP authentication.
Pre-Record Stream
Pre-Record Stream
- is a streaming buffering in memory chips from live stream data. When alarm triggered, the
buffer stream will provide image data for a moment before the trigger starts. The pre-record stream supported
both HTTP & RTSP protocols with the URL list we provide.
Depend on – pick up which pre-config stream from above to use on Pre-record stream.
Pre-record time - allow you to set an accurate time to determine how many seconds stream data should be saved
before the alarm triggered.
A stream list page will be shown after clicking the stream name such as “Primary stream”.
You can use RealPlayer, VLC Player or QuickTime Player to play the live stream from camera in Intranet or Internet.