Orantek IP226, User Manual

Page: 19 / 54

19
TCP/IP Setup
The camera is set up to obtain the IP address automatically (DHCP) by default. Should you may wish to assign the IP
address manually, use the TCP/IP Setup page to enter the address details.
Obtain an IP address automatically (DHCP):
If your network supports a DHCP server (e.g. router) select this option to have the IP address is assigned automatically.
If you select Obtain an IP address automatically you should select Obtain a DNS Server address automatically.
Use the following IP address:
Select this option when a fixed IP is required.
IP address - Type the IP address of your camera.
Subnet mask - Type the subnet mask.
Default gateway - Type the default gateway.
Obtain DNS Server address automatically:
If your network supports a DHCP server (e.g. router) select this option to have the DNS Server address is assigned
automatically.
Use the following DNS server address:
Primary DNS IP address - Type the IP address of the primary DNS server.
Secondary DNS IP address - Type the IP address of the secondary DNS server, if necessary.
HTTP/RTSP port - The default HTTP port number is 80, it is also can be use for RTSP port.
RTP port range - It is for UPnP port forwarding, 1 camera actually use 2 RTP ports, one for video, the other for audio.
(See UPnP setup)
HTTP/RTSP Authentication method - Select Basic Authentication or Digest Access Authentication.