9
Crush PiX 35LDX
12
13. FX Level
Use this control to set the amount of digital effect applied to the output signal.
14. Tuner LED
Play a note on your guitar. The appropriate red LED will illuminate on the display to indicate the
note being played. If the green
#
LED also illuminates, this indicates a chromatic note, e.g.
F Sharp (
#).
The
>
arrow LED indicates the note is tuned flat (too low in pitch).
The
<
arrow LED indicates the note is tuned sharp (too high in pitch).
Adjust the string until the green
OK
LED between the two arrows is lit.
15. Tuner:
Depress this button to activate the tuner.
18. Overdrive Pedal Input
Use this jack to connect a latching footswitch to enable remote on/off switching of the
overdrive.
19. Line Output
Use this unbalanced jack to send a line level signal to another amplifier, the mixing board, or
recording console.
