10
Installing OrangeUSB 2.0 Hi-Speed Drivers in Windows XP
Step 1
•
Insert the iBOT
2
Installer CD. Once
inserted, the iBOT
2
Installer will
automatically start and display the menu to
the right.
•
Click on "Install OrangeUSB Drivers"
•
Follow the onscreen instructions.
•
The OrangeUSB 2.0 drivers will be copied
to: C:\windows\drivers\ousb2\
Step 2
•
The OrangeUSB Setup dialog to the right
will appear. Click “Next.” To continue
•
Another OrangeUSB Setup dialog will
appear. Click “Finish” to continue.
•
The
iBOT
2
Setup dialog, as displayed in
Step 1 above, will appear. Click on the box
next to the “Exit Setup”.
Step 3
•
When Setup has finished, select “No, I will
restart my computer”.
•
Click on the Close button,
•
Shutdown Windows XP and install the USB
2.0 PCI Host Controller board.
NOTES:
Refer to your computer’s manual for instructions on how to open your computer and install a
PCI card.
IMPORTANT: Before handling the PCI board or touching anything in the computer ground yourself by
touching the power supply for a couple of seconds. Failure to do this may damage the
board and/or your computer.
Step 4
•
With your computer off, open your computer
case.
•
Locate an open PCI slot. If there is a
faceplate covering the opening to the back
panel, remove it.
•
Locate the USB 2.0 PCI Host Controller
board and insert it into the free slot. Once
inserted, screw the board in securely.
•
Connect your internal devices as needed.
•
Close
computer.
•
Turn the computer power on.