TRUST 380 USB 2.0 SPACEC@M
1
U K
Method when using for the first time
Chapter
1.
Uninstalling old drivers and devices
(4.1)
2.
Installation in Windows 98/ME/2000/XP
(4.2)
3. Connecting
(4.3)
4.
Checking after the installation
(4.4)
5.
Using the camera
(4.5)
1 Introduction
This instruction manual is for users of the TRUST 380 USB 2.0 SPACEC@M. The
TRUST 380 USB 2.0 SPACEC@M is intended to be used in combination with a USB
2.0 USB port. The Trust 380 USB 2.0 SPACEC@M can be used to make short films,
take photographs (snapshots) or as a webcam during video conferencing.
2 Safety
Read the following instructions carefully before use.
-
The TRUST 380 USB 2.0 SPACEC@M does not require any special
maintenance. Use a slightly damp, soft cloth to clean the camera.
-
Do not use aggressive substances, such as benzene or white spirit, to clean the
device. These may harm the material.
-
Do not submerge the device in liquid. This may be dangerous and will damage
the device. Do not use this device near water.
-
Make sure nothing is placed on the cable. Do not use this device in an area
where the cable can become worn or damaged as a result of people walking over
it.
-
Do not repair this device yourself.
3 Approval
-
This device meets the essential requirements and other relevant conditions of the
applicable European directives. The Declaration of Conformity (DoC) is available
at www.trust.com/13497/ce.
4 Installation
4.1
Uninstalling old drivers and devices
The most common cause of faults during installation is the presence of a driver for a
similar, old device. The best solution is to first remove all drivers related to old
devices before installing the new driver.
1.
Enter the Windows ‘Safe Mode’ (press F8 when starting Windows and then
select ‘Safe Mode’ from the menu which will be displayed).
2.
Click on ‘Start – Settings – Control Panel’ and double-click on the
‘Add/Remove Programs’ icon.
3.
Find all the programs for similar, old devices and remove these by clicking on
the ‘Add/Remove’ button. When in the ‘Safe Mode’, it is possible for some
programs to appear twice. In that case, remove the duplicates as well.
4.
Restart the computer.
!
