Manual for Tire Pressure Monitoring Systems, TPMS
3/17
System Scope of Use and Warnings
Tire Pressure Monitoring System, TPMS
This system is a sensing device designed to measure and display tire operation and / or
activate an alert to the driver when pressure and temperature irregularities are detected.
It is the responsibility of the driver to react promptly and with discretion to alerts.
Abnormal tire inflation pressure should be corrected at the earliest opportunity
Caution The system is wireless RF product; therefore, it may not receive signal due to
interference environment or incorrect operating or installation. When the system
continually cannot receive signal from one of the tire sensor more than 20 minutes
since the system be switched on, the system will show“E2”. In this case, it may
cause by a RF interference environment and driver needs to drive the vehicle to other
place. If the display still cannot receive any correct signal from tire sensor, then, driver
needs to find a nearby qualified tire maintain service for checking and maintain. It
may cause by a tire sensor damaged or battery power consumption is low (the
battery consumption will be lower than under normal using condition due to sensors
need to send warning signal continually to driver) . If the system continually cannot
receive signal from any sensors more than 20 minutes, the system might damaged
and will show “E1”. Driver needs to drive to other place (there might be
interference nearby) or send the system to agent for repair
System Installation and Usage
Please follow the installation process in the manual to ensure the product is under warranty.
The system is only for Mazda CX5 OE TPMS sensor. The standard tire pressure range is 20
psi~48 psi. The maximum tire pressure that the system could measure is 51 psi. Please note
the system is not compatible with iron rim.
Reacting to Alerts
When an alert or warning is received, reduce vehicle’s speed and proceed to a safe
location to stop where the tire can be inspected and /or serviced.
The low-pressure alert indicates that the air pressure has dropped to a selected minimum
and a high-temperature alert indicates that the temperature of the tire content has
surpassed the threshold value set.
Use of Chemicals
Temporary resealing or re-inflation products containing internal sealants or propellants in
any tire assembly may adversely affect the operation of the sensor/transmitter.
