Oracle X9-2 Service Manual Download

Page: 13 / 55

•

Oracle Database Appliance X9-2-HA Server Node Status Indicators

See a description of the Oracle Database Appliance X9-2-HA server node front and back
status indicators.

•

Oracle Database Appliance X9-2-HA Storage Shelf Indicators

See a description of the front and back Oracle Database Appliance X9-2-HA storage
shelf status indicators.

Oracle Database Appliance X9-2-HA Server Node Status Indicators

See a description of the Oracle Database Appliance X9-2-HA server node front and back
status indicators.

•

Server Node Front Panel Status Indicators

See a listing of the various font panel status indicators for the Oracle Database Appliance
X9-2-HA server node.

•

Server Node Back Panel Status Indicators

See a listing of the various back panel status indicators for the Oracle Database
Appliance X9-2-HA server node.

Server Node Front Panel Status Indicators

See a listing of the various font panel status indicators for the Oracle Database Appliance
X9-2-HA server node.

The following figure shows the Oracle Database Appliance X9-2-HA server node front panel
and includes indicators for the system.

Chapter 1

Oracle Database Appliance X9-2-HA Status Indicators

1-7

Summary of Contents for X9-2
























































Search results

Summary of Contents for X9-2

Reviews:

Related manuals for X9-2

Brands by name

Popular brands

Oracle X9-2, Service Manual

Search results

Summary of Contents for X9-2

Reviews:

Related manuals for X9-2

Brands by name

Popular brands