Oracle X8-8, Installation Manual

Page: 58 / 134

Back Panel Connectors and Ports
■
The SER MGT port uses an RJ-45 cable and is always available. This port is the default
connection to the Oracle ILOM SP.
See
“SER MGT Ports” on page 60 .
■
The network management port (NET MGT) port is the optional connection to the Oracle
ILOM SP. The SP network management port uses an RJ-45 cable for a 10/100 BASE-T
connection.
See
“NET MGT Ports” on page 61 .
■
NET Ethernet ports: The Ethernet ports, labeled NET0, NET1, NET2, and NET3, connect
the server to the network. The server Ethernet interfaces operate at 100 Mbit/sec, 1000
Mbit/sec, and 10,000 Mbit/sec.
See
“Ethernet Ports” on page 62 .
■
USB Ports: USB ports support hot-plugging. You can connect and disconnect USB cables
and peripheral devices while the server is running without affecting server operations.
See
“USB Ports” on page 60 .
■
AC power cables:
The server includes four power supply connectors, one for each power
supply.
See
“Connect Cables and Power Cords” on page 64 .
Back Panel Connectors and Ports
The following figure shows the locations of cable connectors and ports on the back of Oracle
Server X8-8 and the cables and devices that you connect to them.
58 Oracle Server X8-8 Installation Guide • June 2019